
Tesfaldet Gebregerges (PhD)
Dr. Tesfaldet is an Associate Principal Researcher in the field of energy at the Tigray Institute of Policy Studies (TIPS). He was hired by TIPS on competitive bases where academic merit and outstanding publications in renowned peer-reviewed journals are the key criteria for selection. He is currently working on energy policy and energy system analysis, targeting optimum renewable energy source deployment for uplifting energy access and energy supply. Before joining TIPS, he was working as an Assistant Professor at Mekelle University, Ethiopian Institute of Technology Mekelle (EiT-M) delivering thematic courses applicable to energy systems analysis at both undergraduate and postgraduate tiers.
His main research interests and scientific accomplishments fall in the areas of system analysis, stretching from modeling, simulation and optimization to pinch analysis and heat integration of processes, with a particular focus on energy and environmental sustainability. He also conducts general research in the area of regional renewable energy integration and associated impacts on existing electricity grids.
More recently, Dr. Tesfaldet completed an undertaking as a Research Associate in a project entitled “Regional- and distributed-scale power-to-gas (P2G) deployments” at the Mechanical Engineering Department of the Petroleum Institute (PI), Abu Dhabi, the United Arab Emirates (UAE). While working as a Research Associate at the Petroleum Institute, his task was to evaluate scenario-based deployment study of fluctuating renewables in the UAE energy system for years 2030-2050.
The research work encompasses analysis of the proposed diversified future UAE’s power sector, comprising solar photovoltaic (PV), concentrated solar power (CSP), natural gas, waste to energy (W2E) and nuclear power, and modeling and simulation of storage system for excess electricity via the P2G concept. The entire country’s energy system analysis was carried out in EnergyPLAN and System Advisor Model (SAM) software with the resulting predictions of primary fuel supply for balancing electricity demand and supply, expected annual CO 2 emissions from electricity generation, possible excess electricity generation from renewables, and total investment and operational costs of the studied scenarios. On a component level, He successfully carried out the modelling and simulation study of an integrated system for excess renewable electricity storage and CO 2 utilization in Aspen Plus software using built-in component blocks and FORTRAN routines.
Apart from his recent research engagement as a Research Associate, his PhD research work carried out at the Hong Kong University of Science and Technology (HKUST) evidences his acquisition of a variety of transferable seasoned knowledge and skills on experimental based process modeling and simulation of renewable power generation from biomass waste. The title of his doctoral dissertation was “Integration of Biomass Drying and Power Generation.” Made up of both theoretical and experimental study of the drying process of solid fuel, its central aim was to improve energy efficiency during thermochemical conversion. With this in mind, he was able to design a new and functional strategy for reducing the heat required to dry solid biomass fuel by integrating it with an existing power generation plant. Cognizant to the excellent performance he showed during his PhD study, he was futured in the flyer prepared by the HKUST admissions office with the title “Dreaming for Sustainability -The origins of an Environmental Scientist” as indicated in
https://pg.ust.hk/assets/people/Tesfaldet%20GEBREEGZIABHER/Tesfaldet%20GEBREEGZIABHER .
Dr. Tesfaldet has published numerous articles in renowned refereed journals and conference proceedings. He also delivered presentations in international conferences. Furthermore, as a professional responsibility, he delivered review services for reputable international journals in the area of energy, namely Elsevier’s Energy and Waste management journals.
Besides being an active researcher and a tutor, Dr. Tesfaldet has participated in curriculum development and review of the BSc program for the Biological and Chemical Engineering Department and PhD program in Energy for the School of Mechanical and Industrial Engineering of Mekelle University. He has also assumed various managerial positions. He has worked as Dean of Students; Chair, Research and Community Service, Mekelle Institute of Technology (MIT); and Officer, Contract Research and Publication, Mekelle University. As head of the Contract Research and Publication office, he developed competency framework guidelines for staff promotions while in position.
Research Interest
Energy /Process Systems Design, Simulation, Modeling and Optimization., Energy Policy, Energy and Environmental Sustainability, Power Generation, Renewable Energy Integration, Bioenergy and Biofuels., Waste to Energy (W2E).
Publication
1. V. Eveloy, T. Gebreegziabher, “Excess Electricity and Power-to-gas Storage Potential in the Future Renewable-based Power Generation Sector in the United Arab Emirates”, Energy, vol. 160, pp. 426–450, 2019.
2. V. Eveloy, T. Gebreegziabher, “A Review of Projected Power-to-gas Deployment Scenarios”, Energies, 11(7), 2018. .
3. Bazargan, T. Gebreegziabher, C. W. Hui, and G. McKay, “The effect of alkali treatment on rice husk moisture content and drying kinetics,” Biomass and Bioenergy, vol. 70, pp. 468–475, 2014. .
4. T. Gebreegziabher, A. O. Oyedun, H. T. Luk, T. Y. G. Lam, Y. Zhang, and C. W. Hui, “Design and optimization of biomass power plant,” Chem. Eng. Res. Des., vol. 92, no. 8, pp. 1412–1427, 2014. .
5. A.O. Oyedun, T. Gebreegziabher, D. K. S. Ng, and C. W. Hui, “Mixed-waste pyrolysis of biomass and plastics waste – A modeling approach to reduce energy usage,” Energy, vol. 75, pp. 127–135, 2014. .
6. L. Jin, T. Gebreegziabher, Z. Yu, A. O. Oyedun, Z. Yi, W. Maojian, and C. W. Hui, “Modeling and optimization of microalgae drying for power generation,” Energy Procedia, vol. 61, pp. 168–171, 2014. .
7. Z. Yi, A. O. Oyedun, W. Maojian, T. Gebreegziabher, Z. Yu, L. Jin, and H. C. Wai, “Modeling, integration, and optimization of biomass and coal co-gasification,” Energy Procedia, vol. 61, pp. 113–116, 2014. .
8. T. Gebreegziabher, A. O. Oyedun, Z. Yu, W. Maojian, Z. Yi, L. Jin, C. W. Hui, “Biomass Drying for an Integrated Power Plant: Effective Utilization of Waste Heat,” Computer Aided Chemical Engineering, vol.33, pp. 1555–15602,2014. .
9. T. Gebreegziabher, A. O. Oyedun, and C. W. Hui, “Optimum biomass drying for combustion – A modeling approach,” Energy, vol. 53, pp. 67–73, 2013. .
10. O. Oyedun, T. Gebreegziabher, and C. W. Hui, “Mechanism and modeling of bamboo pyrolysis,” Fuel Process. Technol., vol. 106, pp. 595–604, 2013. .
11. A. O. Oyedun, K. L. Lam, T. Gebreegziabher, and C. W. Hui, “Optimization of multi-stage pyrolysis,” Appl. Therm. Eng., vol. 61, no. 1, pp. 123–127, 2013. .
12. H. T. Luk, T. Y. G. Lam, A. O. Oyedun, T. Gebreegziabher, and C. W. Hui, “Drying of biomass for power generation: A case study on power generation from empty fruit bunch,” Energy, vol. 63, pp. 205–215, 2013. .
13. T. Gebreegziabher, A. O. Oyedun, Y. Zhang, C. W. H,” Effective Optimization Model for Biomass Drying,” Computer Aided Chemical Engineering, vol. 32, pp. 97-102, 2013. .
14. A.O. Oyedun, T. Gebreegziabher, and C. W. Hui, “Co-pyrolysis of biomass and plastics waste: A modeling approach,” Chem. Eng. Trans., vol. 35, pp. 883–888, 2013. .
15. T. Gebreegziabher, A. O. Oyedun, K. L. Lam, H. K. M. Lee, and C. W. Hui, “Optimization of MSW feed for waste to energy practices,” Chem. Eng. Trans., vol. 29, pp. 679–684, 2012. .
16. K. L. Lam, T. Gebreegziabher, A. O. Oyedun, H. K. M. Lee, and C. W. Hui, “CFD study on fluidized bed pyrolyzers,” Chem. Eng. Trans., vol. 29, pp. 661–666, 2012. .
17. A.O. Oyedun, KL Lam, T. Gebreegziabher, HKM Lee, C. W. Hui, “Kinetic Modelling of Waste Bamboo Pyrolysis” Chem. Eng. Trans., vol. 29, pp. 697–702, 2012.
Google Scholar citation page.
2. V. Eveloy, T. Gebreegziabher, “A Review of Projected Power-to-gas Deployment Scenarios”, Energies, 11(7), 2018. .
3. Bazargan, T. Gebreegziabher, C. W. Hui, and G. McKay, “The effect of alkali treatment on rice husk moisture content and drying kinetics,” Biomass and Bioenergy, vol. 70, pp. 468–475, 2014. .
4. T. Gebreegziabher, A. O. Oyedun, H. T. Luk, T. Y. G. Lam, Y. Zhang, and C. W. Hui, “Design and optimization of biomass power plant,” Chem. Eng. Res. Des., vol. 92, no. 8, pp. 1412–1427, 2014. .
5. A.O. Oyedun, T. Gebreegziabher, D. K. S. Ng, and C. W. Hui, “Mixed-waste pyrolysis of biomass and plastics waste – A modeling approach to reduce energy usage,” Energy, vol. 75, pp. 127–135, 2014. .
6. L. Jin, T. Gebreegziabher, Z. Yu, A. O. Oyedun, Z. Yi, W. Maojian, and C. W. Hui, “Modeling and optimization of microalgae drying for power generation,” Energy Procedia, vol. 61, pp. 168–171, 2014. .
7. Z. Yi, A. O. Oyedun, W. Maojian, T. Gebreegziabher, Z. Yu, L. Jin, and H. C. Wai, “Modeling, integration, and optimization of biomass and coal co-gasification,” Energy Procedia, vol. 61, pp. 113–116, 2014. .
8. T. Gebreegziabher, A. O. Oyedun, Z. Yu, W. Maojian, Z. Yi, L. Jin, C. W. Hui, “Biomass Drying for an Integrated Power Plant: Effective Utilization of Waste Heat,” Computer Aided Chemical Engineering, vol.33, pp. 1555–15602,2014. .
9. T. Gebreegziabher, A. O. Oyedun, and C. W. Hui, “Optimum biomass drying for combustion – A modeling approach,” Energy, vol. 53, pp. 67–73, 2013. .
10. O. Oyedun, T. Gebreegziabher, and C. W. Hui, “Mechanism and modeling of bamboo pyrolysis,” Fuel Process. Technol., vol. 106, pp. 595–604, 2013. .
11. A. O. Oyedun, K. L. Lam, T. Gebreegziabher, and C. W. Hui, “Optimization of multi-stage pyrolysis,” Appl. Therm. Eng., vol. 61, no. 1, pp. 123–127, 2013. .
12. H. T. Luk, T. Y. G. Lam, A. O. Oyedun, T. Gebreegziabher, and C. W. Hui, “Drying of biomass for power generation: A case study on power generation from empty fruit bunch,” Energy, vol. 63, pp. 205–215, 2013. .
13. T. Gebreegziabher, A. O. Oyedun, Y. Zhang, C. W. H,” Effective Optimization Model for Biomass Drying,” Computer Aided Chemical Engineering, vol. 32, pp. 97-102, 2013. .
14. A.O. Oyedun, T. Gebreegziabher, and C. W. Hui, “Co-pyrolysis of biomass and plastics waste: A modeling approach,” Chem. Eng. Trans., vol. 35, pp. 883–888, 2013. .
15. T. Gebreegziabher, A. O. Oyedun, K. L. Lam, H. K. M. Lee, and C. W. Hui, “Optimization of MSW feed for waste to energy practices,” Chem. Eng. Trans., vol. 29, pp. 679–684, 2012. .
16. K. L. Lam, T. Gebreegziabher, A. O. Oyedun, H. K. M. Lee, and C. W. Hui, “CFD study on fluidized bed pyrolyzers,” Chem. Eng. Trans., vol. 29, pp. 661–666, 2012. .
17. A.O. Oyedun, KL Lam, T. Gebreegziabher, HKM Lee, C. W. Hui, “Kinetic Modelling of Waste Bamboo Pyrolysis” Chem. Eng. Trans., vol. 29, pp. 697–702, 2012.
Google Scholar citation page.
https://scholar.google.com.hk/citations?user=Ei6qx-MAAAAJ&hl=en
Read more hidden text
